NMX-DEC-N2212

JPEG 2000 Digital Cinema Grade Video over IP Decoder, HDMI

DescriptionJPEG 2000 Digital Cinema Grade Video over IP Decoder, HDMI
Part #FGN2212-SA
Data SheetsVideos
ManualsProduct GuidesWhite PapersFirmware Files
AMX-PI2 Product Information
SVSI Tools

N-ABLE-PC
ZIP | 218 MB | v 2017-05-15

N-ABLE-MAC
ZIP | 26.99 MB | v 2016.11.11

SVSI SNMP MIB
ZIP | 10 KB

Photos

OVERVIEW
The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. The NMX-DEC-N2212 Decoder is used to decode streams back to DVI or HDMI format for display on any monitor. Pair with the NMX-ENC-N2121 to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

The NMX-DEC-N2212 includes Local Play, allowing users to upload and save 8 playlists that can contain up to 64 jpeg or PNG files. When a video stream is lost, the stored images will play, preventing blank displays.

Includes serial and single network port. Digital video output only.

COMMON APPLICATION
The NMX-DEC-N2212 is the perfect solution for matrix switching and distribution of HD, cinema-grade quality video over LAN. Common applications include enterprise, house of worship, entertainment, and stadiums.

FEATURES

  • Input and Output Scaling – Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
  • Plug-n-Play – Auto-detect technology reduces installation and programming time
  • Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
  • Unlimited Scalability
  • Stand Alone or Card – Available as a stand alone device, or card for use with NMX-ACC-N9206

SPECIFICATIONS

VIDEO

  • Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port
  • Video Output: HDMI, DVI-D (through adapter)
  • Formats: HDMI, DVI-D (through adapter), HDCP content protection support
  • Output Resolutions:
    • Supports most common HD resolutions up to 1920x1200.
      • **720x480 @ 59Hz, 640x480 @ 60Hz, **720x480 @ 60Hz, **720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, **1280x720 @ 50Hz, **1280x720 @ 59Hz, **1280x720 @ 60Hz, 1360x768 @ 60Hz, 1366x768 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1152x864 @ 60Hz, 1600x900 @ 60Hz, 1440x900 @ 60Hz, 1280x960 @ 60Hz, 1280x1024 @ 60Hz, ***1600x1200 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 23Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, **1920x1080 @ 50Hz, **1920x1080 @ 59Hz, **1920x1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz, ***1920x1200 @ 60Hz

**supported in component mode

***reduced blanking only

AUDIO

  • Input Signal Types: Network video over Ethernet via RJ45
  • Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
  • HDMI Audio Formats: 8ch PCM

LATENCY

  • 50 ms for 720p60
  • 140ms for 1080p60

Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.

Note: Scaling adds one frame of latency (17ms at 60fps).

COMMUNICATIONS

  • Ethernet
    • P1
    • 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP

PORTS

  • +12V 2A: One 12 Volt DC power input
  • P1:
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  • RS232:
    • 3-pin terminal Phoenix connector
    • Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
  • HDMI OUT: HDMI video output

CONTROLS AND INDICATORS – FRONT PANEL

  • RESET Button:
    • Recessed pushbutton
    • Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
  • ID Button:
    • Recessed pushbutton
    • Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
  • POWER LED:
    • On solid (green) when operating power is supplied (via PoE or local power supply)
    • This activity is also shown by the PWR LED on the rear panel
  • STATUS LED:
    • On flashing (green) when there is software activity
    • This activity is also shown by the STAT LED on the rear panel

CONTROLS AND INDICATORS – REAR PANEL

  • PWR LED: Same as POWER LED described above
  • HDMI LED: On (green) when there is a connection to a valid video source
  • STAT LED: Same as STATUS LED described above
  • STRM LED: On (green) when the unit is streaming video

POWER SUPPLY

  • Power Supply, External, Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; Included in shipment. NMX-ACC-N9312 (FGN9312)

ENVIRONMENTAL

  • Temperature: 32° to 104°F (0° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)
  • Heat Dissipation: Up to ~44 BTU/hr

GENERAL

  • Dimensions (HWD): 1.05" x 7.888" x 5" (2.67 cm x 20.04 cm x 12.7 cm)
  • Weight: 1.4 lbs (0.67 kg)
  • Mounting Options:
    • Stand alone, surface mount, wall mount, or rack mount
    • Surface and wall mounting requires (not included):
      • NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
    • Rack mounting requires one of the following (not included):
      • NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
      • NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
  • Regulatory Compliance: FCC, CE, and NTRL
  • Recommended Accessories:
    • NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders, Decoders and Audio Transceiver
    • NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
    • NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
    • NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


NAME DESCRIPTION PART #
NMX-ACC-N9382 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders, Decoders and Audio Transceiver (FGN9382)
NMX-ACC-N9101 Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver (FGN9101)
NMX-ACC-N9102 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver (FGN9102)
NMX-ACC-N9206 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units (FGN9206)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty