NMX-ENC-N3121

H.264 Compressed Video over IP Encoder

DescriptionH.264 Compressed Video over IP Encoder
Part #FGN3121-SA
Data SheetsVideos
ManualsProduct GuidesWhite PapersFirmware Files
AMX-PI2 Product Information
SVSI Tools

N-ABLE-PC
ZIP | 218 MB | v 2018-01-29

Photos

OVERVIEW
The N3000 Video over IP Series extends the reach of SVSI's Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.

The N3000 Series' H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI's commitment to provide unsurpassed Networked AV quality.

H.264 decoder with expanded LocalPlay. Includes IR, serial, balanced audio, and two network ports (one POE). Digital video output only. H.264 decoder card with expanded LocalPlay, requires NMX-ACC-N9206 cage.

COMMON APPLICATION
The NMX-ENC-N3121 is the perfect solution for quality streaming over low bit rate WAN. Common applications include distance education, Multi-Site Enterprise, and IPTV Streaming.

FEATURES

  • Power Over Ethernet (PoE) — Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
  • Infrared (IR) — Infrared emitter connection allows control of low-cost, IR-only display devices
  • Onboard Control — All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
  • Unlimited Scalability
  • Pass-Through DVI — DVI interface allows easy installation with local display such as desktop PC applications
  • Stand Alone or Card — Available as a stand alone device, or card for use with NMX-ACC-N9206

SPECIFICATIONS

VIDEO

  • Digital Video Input: HDMI (through adapter), DVI-I
  • Analog Video Input
    • RGB/VGA, Component
    • VGA and Component are supported through a passive adapter
  • Video Output
    • Network video over Ethernet via RJ45 port, DVI-D, HDMI
    • HDMI is supported through a passive adapter
  • Formats
    • HDMI (through adapter), DVI-D, DVI-I, Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
    • HDMI and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
  • Progressive Input Resolutions
    • Supports most common HD up to 1080p60.
      • **720x480 @ 59Hz, 640x480 @ 60Hz, **720x480 @ 60Hz, **720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, **1280x720 @ 50Hz, **1280x720 @ 59Hz, **1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, **1920x1080 @ 50Hz, **1920x1080 @ 59Hz, **1920x1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz
  • Interlaced Input Resolutions
    • Supports 1080i60.
      • **720x480 @ 59Hz, 640x480 @ 60Hz, **720x480 @ 60Hz, **720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, **1280x720 @ 50Hz, **1280x720 @ 59Hz, **1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, **1920x1080 @ 50Hz, **1920x1080 @ 59Hz, **1920x1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz
  • Analog Input Resolutions
    Input resolutions supported @60Hz refresh rates are also supported @59.94Hz.
    • Supports most common HD up to 1080p60.
      • **720x480 @ 59Hz, 640x480 @ 60Hz, **720x480 @ 60Hz, **720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, **1280x720 @ 50Hz, **1280x720 @ 59Hz, **1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, **1920x1080 @ 50Hz, **1920x1080 @ 59Hz, **1920x1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz
  • Analog-To-Digital Conversion: 8-bit 150 MHz per each of three color channels
    The N3121 Encoder does not accept Composite or S-Video (YC).
  • Output Resolutions: Matched to inputs

**supported in component mode

AUDIO

  • Input Signal Types: Embedded audio on DVI-D or HDMI (through adapter), or Analog Stereo (Balanced or Unbalanced).
  • Output Signal Types: Ethernet
  • HDMI Audio Formats: Stereo 2-channel
  • Analog Audio Formats: Stereo 2-channel
  • Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz

LATENCY

  • Latency: 175 ms at 60 fps

Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency

Note: Scaling adds one frame of latency (17ms at 60fps)

COMMUNICATIONS

  • Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
  • HDMI: HDCP, EDID management
  • Network Stream
    • A/V Compression: H.264 high profile video, AAC audio
    • Network Standards: MPEG-TS, RTP, RTSP, HTTP-live, RTMP

PORTS

  • +12V 2A: One 12 Volt DC power input.
  • P0
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
    • Provides both the network connection and the power to the Encoders and Decoders
  • P1
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
    • Provides network connection
  • IR: 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
  • RS232: 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
  • AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
  • DVI-D OUT: DVI-D female; HDMI/DVI digital video/audio output. Allows for video and embedded digital audio output
  • DVI-I IN: DVI-I female; HDMI/DVI digital video/audio input. Allows for the use of analog or digital video sources (as well as embedded audio)

Note: DVI-D output is the digitally converted analog signal from the DVI-I input. Appropriate adapter or interface cable required for DVI to accommodate HDMI. With the right adapter, the DVI-I Input port accepts component signals.

CONTROLS AND INDICATORS – FRONT PANEL

  • RESET Button
    • Recessed pushbutton
    • Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
  • ID Button
    • Recessed pushbutton
    • Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
  • POWER LED
    • On solid (green) when operating power is supplied (via PoE or local power supply)
    • This activity is also shown by the PWR LED on the rear panel
  • STATUS LED
    • On flashing (green) when there is software activity
    • This activity is also shown by the STAT LED on the rear panel

CONTROLS AND INDICATORS – REAR PANEL

  • PWR LED: Same as POWER LED described above
  • HDMI LED: On (green) when there is a connection to a valid video source
  • STAT LED: Same as STATUS LED described above
  • STRM LED: On (green) when the unit is streaming video

POWER SUPPLY

  • Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; Not included in shipment. NMX-ACC-N9312 (FGN9312)
  • Power over Ethernet (PoE): Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1).

Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port.

ENVIRONMENTAL

  • Temperature: 32° to 104°F (0° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)
  • Heat Dissipation: Up to ~44 BTU/Hr

GENERAL

  • Dimensions (HWD): 1.05" x 7.888" x 5.5" (2.67 cm x 20.04 cm x 13.8 cm)
  • Weight: 1.55 lbs (0.7 kg)
  • Mounting Options
    • Stand alone, surface mount, wall mount, or rack mount
    • Surface and wall mounting requires (not included)
      • NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
    • Rack mounting requires one of the following (not included)
      • NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders
      • NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
  • Regulatory Compliance: FCC, CE, and NTRL
  • Recommended Accessories
    • NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders and Decoders
    • NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
    • NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders and Decoders
    • NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


NAME DESCRIPTION PART #
NMX-ACC-N9382 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders and Decoders (FGN9382)
NMX-ACC-N9101 N-Series, Mounting Brackets (FGN9101)
NMX-ACC-N9102 Rack Shelf, 1RU, 2 N-Series Units (FGN9102)
NMX-ACC-N9206 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units (FGN9206)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty