DX-RX

DXLink™ HDMI Receiver Module

DescriptionDXLink HDMI RX
Part #FG1010-500
Digital | Analog & Digital
Video • Audio

WATCH THE VIDEO
Sometimes the best way to understand what a product is capable of is to see it in action, which you can do by linking directly to featured online videos, available below.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

InstaGate Pro® Technology

No tools, no delays and no key constraints. AMX's exclusive InstaGate Pro Technology allows traditionally key limited sources to be freely switched to any display without the typical HDCP delays.

SmartScale® Technology

Enjoy crystal clear perfect resolution on every display using AMX's exclusive SmartScale Technology which automatically outputs video that is perfectly scaled to each connected display

Revit BIM

This product is part of the Autodesk Revit database and can be specified in designs for Building Information Modeling (BIM). Click here to download the associated Revit .rfa file from the Autodesk SEEK Web site. It is also searchable under 'AMX' in any Autodesk application."

Data SheetsVideos
ManualsLiterature
A & E SpecificationsWhite PapersDrawingsFirmware FilesHot Fix FilesApplication Files
AMX-PI2 Product Information
Photos

DX-RX - Front Straight On
PNG | 1.73 MB

DX-RX - Front High
PNG | 1.47 MB

DX-RX - Front Left
PNG | 1.33 MB

DX-RX - Rear Right
PNG | 1.68 MB

DX-RX - Rear Straight On
PNG | 1.73 MB

DX-RX - Rear High
PNG | 1.44 MB

DX-RX - Rear Left
PNG | 1.78 MB

DX-RX - Front Right
PNG | 2.31 MB

Regulatory Compliance

OVERVIEW
The DXLink HDMI Receiver is a distance transport solution that features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over one standard twisted pair cable up to 100 meters away from a compatible Enova DVX All-In-One Presentation Switcher, Solecis Digital Switcher, DXLink Transmitter Module or DXLink Wallplate; it accepts all this plus power over the same twisted pair cable when used in conjunction with the Enova DGX 8/16/32/64 Digital Media Switchers, Enova DVX-2150HD or DVX-2155HD. Mount the low-profile DXLink Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display's settings, and send IR control signals back to the head end using the same twisted pair cable.

COMMON APPLICATIONS
DXLink HDMI Receiver Modules is perfect for receiving HDMI and control signals over long distances from a remote DXLink Transmitter Module, DXLink Wallplates, Solecis Digital Switchers, Enova DGX or compatible Enova DVX. The receiver’s built-in control ports can be used to control a destination device and the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX or compatible Enova DVX.

FEATURES

  • Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
  • SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
  • Native NetLinx® Control Everywhere - Control connected destination devices using the built-in IR and RS-232 ports
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • HDCP Compliant
  • DXLink Direct Connection with DXLink Wallplates – When DXLink Wallplates are receiving Power over DXLink from the PS-POE-AT-TC or PDXL-2, they can be connected directly to a DXLink Receiver for a point-to-point solution. Solecis Digital Switchers can also be used in point-to-point applications with a DXLink Receiver.

SPECIFICATIONS

* AMX only supports the following DXLink Power sourcing devices for the DX-RX: Enova DGX 8/16/32/64 Digital Media Switcher, Compatible Enova DVX All-In-One Presentation Switcher (Enova DVX-2150HD or DVX-2155HD), PS-POE-AT-TC High Power PoE Injector, PDXL-2 Power over DXLink Controller or SDX-510M-DX. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. The DXLink HDMI RX can also be powered via the included desktop power supply (ENERGY STAR® qualified) with power cord

GENERAL

  • Dimensions (HWD): 1" x 8 3/4" x 5 1/5" (2.54 cm x 22.12 cm x 13.08 cm)
  • Weight:
    • Approx. 1.1 lb (0.50 kg)
    • Shipping Weight: Approx. 2.20 lb (1.00 kg)
  • Mounting Options: Compatible with all V Style versatile mounting options including rack, surface or pole
  • Compatible AMX Products:
    • Enova DGX 8/16/32/64 Digital Media Switchers
    • Enova DVX-3155HD, DVX-3156HD, DVX-2155HD, DVX-3150HD and DVX-2150HD All-In-One Presentation Switchers
    • AVB-TX-MULTI-DXLINK / AVB-DWP-TX-MULTI-DXLINK DXLink Multi-Format / Decor Style Wallplate Transmitters as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
    • AVB-TX-MULTI-DXLINK DXLink Multi-Format Transmitter
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller
    • SDX-410-DX, Solecis 4x1 HDMI Digital Switcher with DXLink Output (FG1010-304)
    • SDX-510M-DX, Soleics 5x1 Multi-Format Digital Switcher with DXLink Output (FG1010-315)
    • SDX-810-DX, Solecis 8x1 HDMI Digital Switcher with DXLink Output (FG1010-308)
  • MTBF: 381,000 hours
  • Regulatory Compliance:
    • FCC
    • CE EN 55022
    • CE EN 55024
    • CE EN 60950-1
    • IEC 60950-1
    • UL 60950-1
    • cUL
    • RoHS
    • WEEE
  • Included Accessories: Each HDMI RX ships with a desktop power supply (ENERGY STAR® qualified) with power cord (FG1090-160)
  • Recommended Accessories:
    • AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
    • AVB-VSTYLE-RMK-1U, V Style Module Tray, 5 1/4" Depth (FG1010-720)
    • AVB-VSTYLE-RMK-FILL-1U, V Style Module Tray w/ fill Plates, 5 1/4" Depth (FG1010-721)
    • AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
    • CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
    • IR03, External IR Receiver Module (FG-IR03)
    • PS-POE-AT-TC High Power PoE Injector (FG423-84)
    • PDXL-2 Power over DXLink Controller (FG1090-170)

DXLINK

  • Transport Layer Throughput (Max): 10.2 Gbps
  • Twisted Pair Cable Type:
    • Shielded Cat6, Cat6A and Cat7
    • DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
    • For more details and helpful cabling information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX representative
  • Twisted Pair Cable Length: Up to 328 ft (100 m)

ACTIVE POWER REQUIREMENTS

  • AC Power:
    • 100-240 VAC single phase, 50-60 Hz
    • 0.6 A @ 115 VAC max
  • DXLink Power:
    • Power can also be supplied by a DXLink Power sourcing device such as:
      • Enova DGX 8/16/32 Digital Media Switcher (with a DXLink Twisted Pair Output Board installed)
      • Compatible Enova DVX All-In-One Presentation Switcher (2150HD, 2155HD)
      • PS-POE-AT-TC High Power PoE Injector
      • PDXL-2 Power over DXLink Controller
      • SDX-510M-DX, Soleics 5x1 Multi-Format Digital Switcher with DXLink Output (FG1010-315)

      When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration.

      AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.

  • Power Consumption (Max):
    • Local 12V supplied: 18 W
    • Power over DXLink supplied: 15 W
  • Power Connector:
    • 2.1 mm DC Power Jack (local power)
    • Included on DXLink Connection (Power over DXLink)

POWER SUPPLY

  • External, Included: Each HDMI RX ships with a desktop power supply (ENERGY STAR® qualified) with power cord
  • External, Optional: Power can also be supplied by a DXLink Power sourcing device such as:
    • Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Output Board installed)
    • Compatible Enova DVX All-In-One Presentation Switcher (2150HD, 2155HD)
    • PS-POE-AT-TC High Power PoE Injector
    • PDXL-2 Power over DXLink Controller
    • SDX-510M-DX, Soleics 5x1 Multi-Format Digital Switcher with DXLink Output (FG1010-315)

    When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration.

    AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.

ENVIRONMENTAL

  • Temperature (Operating): 32° to 104° F (0° to 40° C)
  • Temperature (Storage): -22° to 158° F (-30° to 70° C)
  • Humidity (Operating): 5% to 85% RH (non-condensing)
  • Humidity (Storage): 0% to 90% RH (non-condensing)

FRONT CONNECTORS

  • Advanced Configuration Interface**: USB Mini-B Connector

BACK CONNECTORS

  • Local Power: 2.1 mm DC Power Jack
  • DXLink Input: RJ-45
  • ICSLAN/Ethernet Port: RJ-45 Connector, TCP/IP Port (ICSLAN 10/100)
  • Serial:
    • 3.5mm Pluggable Phoenix Terminal Block
    • Bidirectional RS-232
    • Standard NetLinx Baudrate 1200-115k
    • Parity support Odd/Even/None
  • IR Control:
    • Port for use with IR03 Receiver (Optional Accessory FG-IR03)
    • Port for use with CC-NIRC Emitter (Optional Accessory FG10-000-11)
  • USB (HID) Keyboard & Mouse**: USB Type B Connector
  • HDMI Output: HDMI Type A Female
  • Analog Stereo Output: 3.5mm Mini-Stereo Jack

CONTROLS

  • Advanced Configuration Interface**: USB Mini-B Connector

INDICATORS

  • Power Indicator: Green indicates whether or not the module is powered on
  • Video Indicator: Green LED indicates the presence of video and audio signals through the module
  • Audio Indicator: Green LED indicates the presence of audio signals through the module
  • Scaling Button and LEDs: 1 push button and 3 green LEDs; use Scaling button to select one of the 3 Scaling options: Bypass, Auto (SmartScale), or Manual. The factory default is Auto (SmartScale). If the RX power cycles, it defaults to the last persisted mode (achieved by pressing scaling button and holding it until the desired scaling mode LED flashes)
  • IR TX Indicator: Red LED lights during the transmission of IR data via the rear IR port
  • IR RX Indicator: Yellow LED lights during the receipt of IR data via the rear IR port
  • RS-232 TX Indicator: Red LED shows serial transmit (TX) data activity
  • RS-232 RX Indicator: Yellow LED shows serial receive (RX) data activity
  • LINK/ACT: Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
  • Status: Green LED lights when the Controller is programmed and communicating properly
  • CEC Indicator: Not currently supported
  • USB Indicator: Not currently supported
  • ID Pushbutton: Places system in NetLinx Device ID assignment mode

USB (HID) KEYBOARD & MOUSE

  • USB (HID) Keyboard & Mouse:
    • (1) USB Mini A/B Connector (“HOST”)
    • Use in conjunction with an Enova DGX Digital Media Switcher, connect a DXLink TX (twisted pair or fiber) to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver (twisted pair or fiber). The Solecis SDX-510M-DX functions as a DXLink Transmitter in this scenario.
    • For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.

HDMI

  • Compatible Formats: HDMI, HDCP, DVI
  • Signal Type Support:
    • HDMI
    • DVI-D (Single Link with HDMI Cable Adapter)
  • Input Signal Type: DXLink from any of the following:
    • DXLink HDMI Transmitter Module
    • DXLink Multi-Format Transmitter Module
    • DXLink Multi-Format Transmitter Wallplate
    • DXLink Enova DGX DXLink Twisted Pair Output Board
    • Enova DVX-3155HD, DVX-3156HD, DVX-2155HD, DVX-3150HD and DVX-2150HD All-In-One Presentation Switchers
    • Solecis Digital Switchers with DXLink Output
  • Output Signal Type:
    • HDMI
    • DVI-D (Single Link With Cable Adapter)
  • Output Scaling: SmartScale or Manual Configuration or Bypass
  • SmartScale Output Resolution Support: All resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display's declared EDID Detailed Timing Definition
  • Output Nominal Voltage: 1.0 Vpp Differential
  • Output Re-clocking: Yes
  • +5V DDC Pin Output: 50 mA when using Enova DXLink Power, 500 mA when using local 12V supply
  • +5V USB Output: 150 mA when using Enova DXLink Power, 500 mA when using local 12V supply
  • Output Rise Time / Fall Time: 425 ps typ (20% - 80%)
  • Propagation Delay (Typ): 25 ms when scaling, 5 us when in bypass mode
  • HDMI Audio Synchronization: Video Formats @ 60Hz frame rate: Audio is actively delayed to match video within 9 ms leading to 10 ms lagging when scaling. When in bypass mode the audio is matched to video within 1 ms.
  • Data Rate (Max):
    • 4.95 Gbps / 6.75 Gbps
    • 6.75 Gbps supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
  • Pixel Clock (Max):
    • 165 MHz / 225 MHz
    • 225 MHz supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
  • Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz ) including but not limited to those resolutions show in the DXLink Twisted Pair Transmitters/Receiver Instruction Manual
  • Deep Color Support:
    • 24-bit, 30-bit, 36-bit
    • 30-bit and 36-bit supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
  • Color Space Support:
    • RGB 4:4:4
    • YCbCr 4:4:4 and 4:2:2
    • Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
  • 3D Format Support:
    • Yes (HDMI Primary Formats)
    • Frame Packing 1080p up to 24Hz
    • Frame Packing 720p up to 50/60Hz
    • Frame Packing 1080i up to 50/60Hz
    • Top-Bottom 1080p up to 24Hz
    • Top-Bottom 720p up to 50/60Hz
    • Side-by-Side Half 1080p up to 50/60Hz
    • Side-by-Side Half 720p up to 50/60Hz
  • Audio Format Support:
    • Dolby TrueHD, Dolby Digital, DTS-HD Master Audio DTS, 2 CH L PCM, 6 CH L-PCM, 8 CH L-PCM
    • Dolby Digital and DTS support up to 48kHz, 5.1 channels.
  • Audio Resolution: 16 bit to 24 bit
  • Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
  • Local Audio Support: Yes for audio extraction
  • HDCP Support: Yes
  • CEC Support: None

STEREO AUDIO

  • Output Signal Types: Stereo Analog
  • Analog Output Level (Max): +2 dBu, unbalanced
  • Analog Output Frequency Response: < +0 dB to -0.5 dB, 20 Hz to 20 kHz
  • Analog Audio Output THD+N: <0.03 %, 1 kHz, -10dBu to +2 dBu
  • Analog Audio Out SNR: >85 dB, 20 Hz to 20 kHz Vin=+2dBu
  • Digital to Analog Reference Level: 0 dBfs = +0 dBu
  • Audio Synchronization: Video Formats @ 60Hz frame rate: Audio is actively delayed to match video within 9 ms leading to 10 ms lagging when scaling. When in bypass mode the audio is matched to video within 1 ms
  • Output Connectors: 3.5mm Mini-Stereo Jack (Analog Stereo)

**This feature will be available upon release of a future firmware update.



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

NAME DESCRIPTION PART #
DX-TX DXLink Multi-Format Transmitters (FG1010-310)
DX-TX-DWP DXLink Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-325-BL/WH)
DX-TX-WP DXLink Multi-Format Wallplate Transmitters (FG1010-320-BL/WH)
AVB-VSTYLE-SURFACE-MNT V Style Module Surface Mount (FG1010-722)
AVB-VSTYLE-RMK-1U V Style Module Tray, 5 1/4" Depth (FG1010-720)
AVB-VSTYLE-RMK-FILL-1U V Style Module Tray w/ fill plates, 5 1/4" Depth (FG1010-721)
AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant (FG423-84)
PDXL-2 Dual Power over DXLink™ Controller (FG1090-170)
CC-NIRC NetLinx IR Emitter Cable (FG10-000-11)
IR03 External IR Receiver Module (FG-IR03)
CBL-HDMI-FL HDMI High Speed Flat Cable (FG10-2180-16)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty