DX-RX-4K

DXLink™ 4K HDMI Receiver Module

DescriptionDXLink HDMI RX
Part #FG1010-510
Digital | Analog & Digital
Video • Audio

WATCH THE VIDEO
Sometimes the best way to understand what a product is capable of is to see it in action, which you can do by linking directly to featured online videos, available below.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

InstaGate Pro® Technology

No tools, no delays and no key constraints. AMX's exclusive InstaGate Pro Technology allows traditionally key limited sources to be freely switched to any display without the typical HDCP delays.

SmartScale® Technology

Enjoy crystal clear perfect resolution on every display using AMX's exclusive SmartScale Technology which automatically outputs video that is perfectly scaled to each connected display

4K READY

Supports 4K and Ultra High Definition (UHD) content

OVERVIEW
The DXLink 4K HDMI Receiver is a 4K and Ultra High Definition (UHD) capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over one shielded Cat6A or Cat7 standard twisted pair cable up to 70 meters.

COMMON APPLICATIONS
DXLink HDMI Receiver Modules are the perfect for receiving HDMI and control signals over long distances from a remote DXLink Transmitter Module or other compatible AMX Transmitter such as Solecis. The receiver's built-in control ports can be used to control a destination device and the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX 100 Series.

FEATURES

  • 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices.
  • Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
  • SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
  • Native NetLinx® Control Everywhere - Control connected destination devices using the built-in IR and RS-232 ports
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • HDCP Compliant
  • DXLink Direct Connection with DXLink Wallplates - When DXLink Wallplates are receiving Power over DXLink from the PS-POE-AT-TC or PDXL-2, they can be connected directly to a DXLink Receiver for a point-to-point solution. Solecis Digital Switchers can also be used in point-to-point applications with a DXLink Receiver.

* AMX only supports the following DXLink Power sourcing devices for the DX-RX: Enova DGX 800/1600/3200/6400 Digital Media Switcher, Compatible Enova DVX All-In-One Presentation Switcher (Enova DVX-2150HD or DVX-2155HD), PS-POE-AT-TC High Power PoE Injector, PDXL-2 Power over DXLink Controller, Solecis SDX-510M-DX and SDX-514M-DX. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. The DXLink HDMI 4K RX can also be powered via the included desktop power supply (ENERGY STAR® qualified) with power cord.

SPECIFICATIONS

GENERAL

  • Dimensions (HWD): 1" x 8 3/4" x 5 3/16" (2.54 x 22.22 cm x 13.18 cm)
  • Weight:
    • Approx. 1.1 lb (0.50 kg)
    • Shipping Weight: Approx. 2.2 lb (1.00 kg)
  • Mounting Options: Compatible with all V Style versatile mounting options including rack, surface or pole
  • Compatible AMX Products:
    • Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX-O-DXL-4K DGX DXLink Twisted Pair 4K Output Board installed
    • DX-TX-DWP-4K, DXLink 4K HDMI Decor Style Wallplate TX as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
    • SDX-414-DX, Solecis 4x1 4K HDMI Digital Switcher with DXLink Output
    • SDX-514M-DX, Solecis 5x1 4K Multi-Format Digital Switcher with DXLink Output
    • SDX-814-DX, Solecis 8x1 4K HDMI Digital Switcher with DXLink Output
    • PS-POE-AT-TC, High Power PoE Injector
    • PDXL-2, Power over DXLink Controller
    • NOTE: For passage of 4K signal content, 4K products must be used. DXLink Twisted Pair 4K Receiver is also compatible with the following DXLink Twisted Pair (non-4K) equipment. Conditions may apply, please reference hardware reference manuals or contact technical support for details
    • Enova DGX 8/16/32/64 Digital Media Switchers with DGX-O-DXL Twisted Pair Output Board installed
    • Enova DVX-3255HD, DVX-3256HD, DVX-2255HD, DVX-3250HD and DVX-2250HD All-In-One Presentation Switchers
    • DX-TX-DWP and DX-TX-WP, DXLink Multi-Format Wallplate Transmitters as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
    • DX-TX, DXLink Multi-Format TX Module
    • SDX-410-DX, Solecis 4x1 HDMI Digital Switcher with DXLink Output
    • SDX-510M-DX, Solecis 5x1 Multi-Format Digital Switcher with DXLink Output
    • SDX-810-DX, Solecis 8x1 HDMI Digital Switcher with DXLink Output
  • MTBF: 1,092,000 hours
  • Airflow: Convection (openings on top of case)
  • Regulatory Compliance:
    • UL 60950-1 2nd Ed. Am2
    • CAN/CSA 22.2 No. 60950-1 2nd Ed. Am2
    • IEC 60950-1 2nd Ed. Am2
    • CE EN 60950-1 2nd Ed. Am2
    • CE EN 55022:2010 Class A
    • CE EN 55024:2010
    • FCC CFR Title 47 Part 15 Subpart B Class A
    • ICES-003 issue 6 Class A
    • CISPR 22
    • CISPR 24
    • RoHS
    • WEEE
  • Included Accessories:
    • Desktop power supply (ENERGY STAR® qualified): 1 per module
    • Unless using DXLink Power as described above, only the provided desktop power supply should be used, and it must not be altered in any way
  • Recommended Accessories:
    • AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
    • AVB-VSTYLE-RMK-1U, V Style Module Tray (FG1010-720)
    • AVB-VSTYLE-RMK-FILL-1U, V Style Module Tray w/fill Plates (FG1010-721)
    • AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
    • CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
    • IR03, External IR Receiver Module (FG-IR03)
    • PS-POE-AT-TC High Power PoE Injector (FG423-84)
    • PDXL-2 Power over DXLink Controller (FG1090-170)

DXLINK

  • Transport Layer Throughput (Max): 10.2 Gbps
  • Twisted Pair Cable Type:
    • Shielded Cat6A and Cat7
    • DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
    • For more details and helpful cabling information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX representative
  • Twisted Pair Cable Length:
    • Up to 262 ft. (80 m) for full 4K format support
    • Up to 328 ft. (100 m) for 1080p and below format support
    • DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
    • For more details and helpful cabling information, reference the white paper titled Cabling for Success with DXLink, or contact your AMX representative

ACTIVE POWER REQUIREMENTS

  • AC Power:
    • 100 to 240 VAC single phase, 50 Hz to 60 HZ
    • 0.6 A @ 115 VAC max.
  • DXLink Power:
    • Power can also be supplied by a DXLink Power sourcing device such as an Enova DGX 100 Series Digital Media Switcher or Solecis 5x1 4K Digital Switcher (SDX-514M-DX), PS-POE-AT-TC High Power PoE Injector (FG423-84), or PDXL-2 Power over DXLink Controller (FG1090-170). AMX does not support the use of any other power supplies or PoE injectors as these may potentially damage the DXLink equipment.
    • When installed in conjunction with the Enova DGX 100 Series Digital Media Switcher, use the Enova DGX 100 Series Configuration Tool located at www.amx.com/enova to determine the power requirements of the configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supplies or the supported Power over DXLink injector. The configuration tool contains instructions on how to determine power requirements.
    • AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.
  • Power Consumption (Max): 18.5 W
  • Power Connector: 2.1 mm DC power jack

POWER SUPPLY

  • External, Included:
    • Desktop power supply (ENERGY STAR® qualified): 1 per module
    • Unless using DXLink Power, only the provided desktop power supply should be used, and it must not be altered in any way
  • External, Optional:
    • Power can also be supplied by a DXLink Power sourcing device such as:
      • Enova DGX 800/1600/3200/6400 Digital Media Switcher with DGX-O-DXL-4K DGX DXLink Twisted Pair 4K Output Board installed
      • PS-POE-AT-TC, High Power PoE Injector
      • PDXL-2, Power over DXLink Controller
      • SDX-514M-DX, Soleics 5x1 4K HDMI Digital Switcher with DXLink Output (FG1010-355)
    • When installed in conjunction with an Enova DGX 100 series use the Enova DGX 100 series Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration
    • AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment

  • Compatible Formats: HDMI , HDCP, DVI (DVI requires conversion cable)
  • Signal Type Support:
    • HDMI, DVI-D (Single Link with a DVI-HDMI Cable Adapter)
    • DisplayPort++ (input only with HDMI cable adapter)
  • Progressive Resolution Support:
    • 480p up to 4096 x 2160 @ 60 Hz* (*Y/Cb/Cr 4:2:0)
    • NOTE: See full list of formats in the DXLink Twisted Pair 4K Transmitters/Receivers Hardware Reference Manual on page 82.
  • 4K Resolution Support:
    • 3840 x 2160p @ 24/25/30 Hz
    • 4096 x 2160p @ 24/25/30 Hz
    • 3840 x 2160p @ 60 Hz, 4:2:0*
    • 4096 x 2160p @ 60 Hz, 4:2:0*
    • * Supported by DX-RX-4K when in Bypass Scaling mode
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1 channels)



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

NAME DESCRIPTION PART #
AVB-VSTYLE-SURFACE-MNT V Style Module Surface Mount (FG1010-722)
AVB-VSTYLE-RMK-1U V Style Module Tray, 5 1/4" Depth (FG1010-720)
AVB-VSTYLE-RMK-FILL-1U V Style Module Tray w/ fill plates, 5 1/4" Depth (FG1010-721)
AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
CC-NIRC NetLinx IR Emitter Cable (FG10-000-11)
IR03 External IR Receiver Module (FG-IR03)
PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant (FG423-84)
PDXL-2 Dual Power over DXLink™ Controller (FG1090-170)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty