DGX-I-DXL-4K

Enova® DGX DXLink™ Twisted Pair 4K Input Board

DescriptionEnova DGX DXLink Twisted Pair 4K Input Board
Part #FG1061-570
Analog & Digital
Video • Audio

SmartScale® Technology

Enjoy crystal clear perfect resolution on every display using AMX's exclusive SmartScale Technology which automatically outputs video that is perfectly scaled to each connected display

WATCH THE VIDEO
Sometimes the best way to understand what a product is capable of is to see it in action, which you can do by linking directly to featured online videos, available below.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

AWARD WINNING PRODUCTS

Best New Product at InfoComm 2011: AMX's Enova DGX
The Enova converts analog and digital video and control, which runs through a 16x16 or 32x32 Enova Digital Media Switcher. The switcher also includes a gigabit Ethernet switch that's fully integrated. You get digital media, control and data on a single Cat5 cable. Here's the rAVe NOW video we shot at InfoComm.

COUNTRY OF ORIGIN: UNITED STATES

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

InstaGate Pro® Technology

No tools, no delays and no key constraints. AMX's exclusive InstaGate Pro Technology allows traditionally key limited sources to be freely switched to any display without the typical HDCP delays.

4K READY

Supports 4K and Ultra High Definition (UHD) content

OVERVIEW
The DGX-I-DXL-4K is a 4K and Ultra High Definition (UHD) capable and HDCP compliant twisted pair cable input board for the Enova DGX 800, Enova DGX 1600, Enova DGX 3200, and Enova DGX 6400 Digital Media Enclosures. It has four connections per board designed to receive audio and video from DXLink Twisted Pair Transmitters while passing bi-directional control and Ethernet signals over one shielded Cat6A or Cat7 standard twisted pair cable up to 70m. DXLink Power is available from the DXLink Input Board to power DXLink Twisted Pair Transmitters.

COMMON APPLICATIONS
The Enova DGX DXLink Twisted Pair Input Board is ideal for applications where source devices are located up to 70 meters away from the Enova DGX Digital Media Switcher and need to be distributed throughout a commercial or residential environment.

FEATURES

  • 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices
  • Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
  • Send HDMI signals up to 70 Meters – Extend the reach of the HDMI with HDCP signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • HDCP Compliant

  • Remotely Powered Transmitters- – Power over DXLink* is available from the DXLink Input Board to power DXLink Transmitters
  • 3D Support – Pass through latest video formats including 3D and Deep Color
  • Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM

*Power over DXLink to DXLink Transmitters must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 800/1600/3200/6400 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD), PS-POE-AT-TC High Power PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. The DXLink Transmitter Module can also be powered via the included desktop power supply (ENERGY STAR® qualified) with power cord

SPECIFICATIONS

  • Compatible Formats: HDMI Video, Audio, Ethernet, USB (HID), Power, Serial Control and IR Control
  • Signal Type Support: DXLink Twisted Pair
  • Connectors: (4) RJ-45 Ports
  • Progressive Resolution Support:
    • 480p up to 4096 x 2160p, 60 Hz* (*Y/Cb/Cr 4:2:0, with 4K RX Scaler in Bypass mode)
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Interlaced Resolution Support:
    • 480i, 576i, 1080i
    • If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode, interlaced input will pass through unaltered.
  • 4K Resolution Support:
    • 3840 x 2160p @ 24/25/30 Hz
    • 4096 x 2160p @ 24/25/30 Hz
    • 3840 x 2160p @ 60 Hz, 4:2:0*
    • 4096 x 2160p @ 60 Hz, 4:2:0*
    • Supported by DX-RX-4K when in Bypass Scaling mode
    • NOTE: See full list of supported formats in “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual”.
  • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1 channels)
  • Compatible AMX Products:
    • Must be used in conjunction with an Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure and a DXLink Twisted Pair Transmitter.
    • Compatible with all AMX 4K DXLink Twisted Pair Transmitters including 4K HDMI Decor Style Wallplate, 4K Solecis Digital Switchers (including 4x1, 5x1 and 8x1). Also compatible with (non 4K) DXLink Twisted Pair Transmitters including HDMI Transmitter Module, Multi-Format Decor Style Wallplate, and Multi-Format Wallplate, and Solecis Digital Switchers (including 4x1, 5x1 and 8x1).
    • For passage of 4K signal content, DXLink Twisted Pair 4K Boards must be used in conjunction with DXLink Twisted Pair 4K Transmitters and Receivers.
    • Additional compatibility is available between DXLink Twisted Pair 4K equipment and DXLink Twisted Pair (non-4K) equipment (see the “DXLink Compatibility” Appendix in the “DXLink Twisted Pair 4K Transmitters and Receivers Hardware Reference Manual” at www.amx.com).
    • Recommended Accessories:
      • DXLink 4K HDMI Receiver Module (FG1010-510)
      • DXLink 4K HDMI Decor Style Wallplate Transmitters (US) (FG1010-330-BL/WH)
      • SDX-414-DX, 4x1 4K HDMI Digital Switcher with DXLink Output (FG1010-314)
      • SDX-514M-DX, 5x1 4K Multi-Format Digital Switcher with DXLink Output (FG1010-355)
      • SDX-814-DX, 8x1 4K HDMI Digital Switcher with DXLink Output (FG1010-318)

Comprehensive specifications for this product are available in the DGX-I-DXL-4K Enova DGX DXLink Twisted Pair 4K Input Board datasheet.



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from Harman Professional University:

  • Getting Started with Enova DGX (Online)

For schedules and registration for these and any Harman Professional University courses, visit College of AMX.

NAME DESCRIPTION PART #
DX-RX-4K DXLink 4K HDMI RX (FG1010-510)
DX-TX-DWP-4K-BL/WH DXLink 4K Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-330-BL/WH)
SDX-414-DX 4x1 4K HDMI Digital Switcher with DXLink Output (FG1010-314)
SDX-514M-DX 5x1 4K Multi-Format Digital Switcher with DXLink Output (FG1010-355)
SDX-814-DX 8x1 4K HDMI Digital Switcher with DXLink Output (FG1010-318)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty