Integrated Axcess System

DescriptionIntegrated Axcess System with CC-IRC
Part #FG5955-20
This Product Has Been Replaced By: NI-Series NetLinx Integrated Controllers

The Axcent3 Integrated Axcess System and Axcent3 PRO Integrated Axcess Control Frame offer versatile, high-density multiport control. They can act as a system master or server, allowing multiple Axcent3 units to be combined in the same system – an AMX exclusive feature. Ports have new power – IR ports can send one-way RS-232. I/O channels can provide automatic, sensed IR power control. RS-232/422/485 ports can operate at up to 115,200 baud. All ports are software configurable by Open AXCESS and AMX Studio Software.


  • Six IR/Serial/RS-232 ports (One-way RS-232 300-38,400 baud, 0-5 VDC)
  • Six RS-232/422/485 ports, 9-pin male D-sub connectors (2-way 300-115,200 baud), XON/XOFF, CTS/RTS
  • Eight relays (normally open) rated at 750 mA, 28 VAC/24 VDC
  • Six input/output channels, rated at 200 mA, contact closure or TTL logic inputs

POWER: 600 mA @ 12 VDC (minimum; not including control cards or bus devices)


  • Front- and rear-panel status LEDs
  • Metal tab strips for communing adjacent relays
  • Four CC-IRC emitters
  • Rack-mount brackets (short)

ENCLOSURE: Metal with black matte finish

DIMENSIONS (HWD): 3 1/2" x 17" x 3" (88.1 mm x 432 mm x 76 mm)

WEIGHT: 5 lbs (2.3 kg)

SOFTWARE: Open AXCESS Axcess Configuration/Diagnostic Software

Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AV for an IT World.

PS2.8 13.5 VDC, 2.8 A Power Supply with 5 mm Phoenix Connector (FG423-05)
CSB Cable Support Bracket (FG517)
AC-RK3 Extended Length Axcent3 Rack Kit (FG518)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty