AXR-RF

RF Receiver (AxLink)

Description
433 MHz
Part #FG782-433

D-Tools Certified Product

This product can be found in the D-Tools manufacturer product database and specified as a third party device when building and proposing a system using D-Tools System Integrator software. D-Tools data includes attributes that make it easier to sell, design, and install systems including: overview, specifications, images, product documentation and more. AMX is a member of the D-Tools Manufacturer Vantage Point (MVP) program designed to provide D-Tools customers the most up-to-date product information.

Revit BIM

This product is part of the Autodesk Revit database and can be specified in designs for Building Information Modeling (BIM). Click here to download the associated Revit .rfa file from the Autodesk SEEK Web site. It is also searchable under 'AMX' in any Autodesk application."

COUNTRY OF ORIGIN: MEXICO

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

OVERVIEW
The AXR-RF Radio Receiver provides wireless reception of AMX radio frequency (RF) transmitters. The AXR-RF connects to an Axcess Controller with an AxLink, 4-pin captive-wire connector. When required for large areas, or multiple-room coverage, multiple receivers can be connected in parallel on the AxLink bus.

FEATURES

  • Receives RF signals from Mio Modero R-2 (418, 433 MHz), Modero ViewPoint (304, 418, 433 MHz) and other AMX one-way wireless Touch Panels
  • Connects to an AxLink control network

SPECIFICATIONS

POWER CONSUMPTION
780 mW; ±12 VDC, 65 mA (max.)

DIMENSIONS (HWD)
1 1/2" x 5 1/16" x 5 1/4" (3.81 cm x 12.93 cm x 13.39 cm)

WEIGHT
10.56 oz (299.37 g)

FRONT PANEL COMPONENTS

RADIO DATA LED
Red LED lights to indicate the AXR-RF has received an RF signal from an AMX transmitter.

AXLINK LED
Green LED that lights to indicate AxLink power/data status as follows:

  • One blink/second indicates power is active and AxLink communication is working.
  • Two blinks/second indicates the devices specified in the main program do not match the devices found.
  • Three blinks/second indicates there is an AxLink communication error
  • Full on indicates there is either no AxLink control/activity (but the power is On) or the Axcess program is not loaded

REAR PANEL COMPONENTS

AXLINK CONNECTOR
4-wire captive-wire AxLink connector for the Central Controller provides data and nominal ±12 VDC power

DEVICE NUMBER DIP SWITCH
8-position DIP switch sets the device number for the AXR-RF.

RF ANTENNA
Receiving antenna screws into the TXC antenna connector. If it is necessary to place the antenna in a remote position, use up to 6 ft. (2 m.) of RG-174 coax cable as an extension. Extend the antenna vertically during use

TXC ANTENNA CONNECTOR
Antenna coaxial connector

RECEIVE FREQUENCIES

  • 304 MHz (FG782-304)
  • 418 MHz (FG782-418)
  • 433 MHz (FG782-433)

MAXIMUM RANGE
300 feet (91.44 m)

ENCLOSURE
Molded black matte plastic



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


NAME DESCRIPTION PART #
PSR5.4 12 VDC, 5.4 A Power Supply with 3.5 mm Phoenix Connector with Retention Screws (FG423-48)
PSN4.4 13.5 VDC, 4.5 A Power Supply with 3.5 mm Phoenix Connector (Discontinued) (FG423-45)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty